This is a GREEN PRODUCT.

Meets Requirements for (Designed for Environment). See link for further info: http://www.epa.gov/dfe/

Cleaner contains no hazardous materials! Low Voc's & Neutral pH.

SDS

Directions:

Pre-Conditioning/Clean Water Extraction Preferred Method--Premix 10oz/gal and apply directly to carpet with a utility pump up sprayer. Allow 10 minutes dwell time, then extract with hot clean, water. Use a carpet rake to allow penetration and cleaning.

Normal Extraction: Pre-spot using solution from spotting directions. Mix 2oz/gal to etraction water and extracts as normal. Problem areas should be sprayed with 10 oz./gal and agitated with a carpet rake.

Spotting: Mix with 10 oz./gal of water. Soak problem area with solution. Agitate with carpet brush or rake and allow 5-10 minutes dwell time. Blot excess liquid with a clean absorbent cloth.


Heavy Browning Areas: Mix Carpet Cleaning Polymer at 20 oz./gal and pre-spray browned areas thoroughly followed by extraction with clean water. Use ceiling or portable fans to dry treated areas quickly!


Dry Agitation Cleaning: Mix at 10 oz. / gal. pre-spray carpet (400 sq. ft./gal of RTU) and agitate into the carpet with a carpet rake in two direction or agitate with counter rotating brush action. Let carpet area dry 24 hours and vacuum thoroughly.


Bonnet Cleaning (low moisture system): Mix at 10 oz./gal. Soak bonnet and remove excess moisture. Lightly pre-spray carpet, allowing 10 minutes dwell time, then bonnet clean as normal.

Recommended 1 Year Shelf Life